Sony PCG-NVR23 VAIO (primary manual) User Manual Download

Page: 74 / 169

To connect two VAIO computers

Connect one end of the i.LINK cable to the i.LINK port on each computer.

Click Start on the Windows

taskbar, and click Control Panel.

Click Network and Internet Connections, and click "Set up or change your home or small office network." The
Network Setup Wizard window appears.

Follow the on-screen Network Setup Wizard instructions.

When the Network Setup Wizard prompts you to name the computer, type in a unique name. You will use this

unique name to differentiate the two computers once they are networked together.

The Network Setup Wizard will also prompt you to name your network. Make sure the Workgroup name is the same
for the two networked computers.

When you finish the Network Setup Wizard on-screen instructions, click Start on the Windows

taskbar and click

My Computer.

Click My Network Places in the Other Places menu. The My Network Places window appears.

Click "View workgroup computers" in the Network Tasks menu. The computers that are networked under the
same Workgroup name are displayed in this window.

Page 74

Summary of Contents for PCG-NVR23 VAIO (primary manual)










































































































































































Search results

Summary of Contents for PCG-NVR23 VAIO (primary manual)

Reviews:

Related manuals for PCG-NVR23 VAIO (primary manual)

Brands by name

Popular brands

Sony PCG-NVR23 VAIO (primary manual), User Manual

Search results

Summary of Contents for PCG-NVR23 VAIO (primary manual)

Reviews:

Related manuals for PCG-NVR23 VAIO (primary manual)

Brands by name

Popular brands