Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz User Manual Download Page 44

Page: 44 / 155

Removing a battery

If you are not using the computer for an extended period of time, remove the battery from the computer to avoid damaging
the battery. You can remove the battery when the computer is on or off.

If the computer is on, connect the AC adapter and exit a power saving mode before you remove the battery.

To remove a battery

Push the battery bay cover down to open it.

Pull the battery out of the battery bay.

Push in and lift up the battery bay cover until it clicks into place.

Rem ov ing a Battery

Page 44

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz




























































































































































Search results

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Reviews:

Related manuals for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Brands by name

Popular brands

Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz, User Manual

Search results

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Reviews:

Related manuals for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Brands by name

Popular brands