Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz User Manual Download Page 41

Page: 41 / 155

Turning on the computer

To turn on the computer

Slide the RELEASE latch to the right and lift the lid while holding the bottom of the computer firmly.

Opening the Com puter

Press the power button until the power indicator turns on.

Turning on the Com puter

If you hold the power button down, the computer turns off.

If the computer screen is too dark or too bright, follow these steps to adjust the brightness:



To increase brightness, press the

key and tap the

key.



To decrease brightness, press the

key and tap the

key.

Page 41

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz




























































































































































Search results

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Reviews:

Related manuals for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Brands by name

Popular brands

Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz, User Manual

Search results

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Reviews:

Related manuals for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Brands by name

Popular brands