Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz User Manual Download Page 114

Page: 114 / 155

Inserting PC Cards

To insert a PC Card

Make sure the front label of the PC Card is facing up.

Push the PC Card gently into the slot. The system automatically detects the PC Card.

Do not force a PC Card into the slot; this may damage the connector pins.

When a PC Card is inserted, do not place your computer in a bag or case. Pressure or shock to a PC Card may damage
your computer.

Touching the head of the PC Card will not damage the connector pins, but damage may occur if the head of the PC Card
is sticking out of the PC Card slot while the computer is being transported.

Inserting a PC Card

Page 114

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz




























































































































































Search results

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Reviews:

Related manuals for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Brands by name

Popular brands

Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz, User Manual

Search results

Summary of Contents for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Reviews:

Related manuals for PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz

Brands by name

Popular brands