Sony MVS-8000X System Installation Manual Download Page 8

Page: 8 / 58

1-2

MVS-8000X/7000X

1-2-2. Recommended Power Cord

w
.

Use the approved Power Cord (3-core mains lead)/Appli-

ance Connector/Plug with earthing-contacts that conforms
to the safety regulations of each country if applicable.

Use the Power Cord (3-core mains lead)/Appliance

Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).

If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Of

ce/Service Center.

c
.

Never use an injured power cord.

Plugging the power cord in the AC inlet, push as far as it

will go.

For customers in the U.S.A and Canada

Power cord, 125 V 10 A (2.4 m) :

1-551-812-31

AC inlet

For customers in the all European countries

Power cord, 250 V 10 A (2.4 m) :

1-782-929-12

AC inlet

Summary of Contents for MVS-8000X System



























































Search results

Summary of Contents for MVS-8000X System

Reviews:

Related manuals for MVS-8000X System

Brands by name

Popular brands

Sony MVS-8000X System, Installation Manual

Search results

Summary of Contents for MVS-8000X System

Reviews:

Related manuals for MVS-8000X System

Brands by name

Popular brands