7
GB
Names and Functions of Parts
SPEED
PITCH
REC
CUE
REC PAUSE
STOP
PLAY/PAUSE
1
5
2
6
3
7
4
8
CUE
PAUSE
OFF
AUTO MODE
RELOOP
IN
OUT
LOOP
AMS
PUSH ENTER
PLAY MODE
ENTER/YES
BANK
UNDO
EDIT/NO
SENGLE PLAY
DISPLAY
REPEAT
REC VOL
INPUT
COAX
ANLG
OPT
0
10
0
PLAY/PAUSE button / indicator (12)
• Press during stop or pause to start playback.
• Press during playback to pause.
Lights during playback, blinks during pause.
!¡
Scrub dial (13)
• Turn during playback to change the playback speed.
• Turn during pause to play the MD in sync with the
dial movement.
• Turn while holding CUE to adjust the cue point.
!™
PITCH slider (15)
Adjusts the pitch.
!£
SPEED slider (15)
Adjusts the speed.
!¢
)
button (12)
Hold down for fast forward.
!∞
LOOP buttons (16)
Use to set a loop. The loop remains in memory after
you exit it, so you can quickly return to the same loop.
RELOOP button
Press after exiting the loop to return to the start point
of the memorized loop and resume looping.
LOOP IN button
Press to set the loop start point.
LOOP OUT button
Press to set the loop end point and start looping.
Press during the loop to exit.
!§
DISPLAY button (18, 33)
Press to switch the information shown in the display.
Each press changes the display mode as follows:
•
Remaining time :
The counter displays the time
remaining on the current track.
•
Elapsed time :
The counter displays the time
elapsed on the current track.
When the play mode is set to Program or Hot Start,
the following is also possible:
•
Playback track :
The numbers of the programmed
or hot start tracks are shown in the title area and the
track being played blinks. The counter displays the
time remaining on the current track.
!¶
REC VOL knob (24)
Use to adjust the level of the signal input from the
LINE IN jacks during analog recording. This function
only operates when INPUT is set to “ANLG.”
!•
INPUT switch (23)
Use to select the input jack for the recording program
source.
!ª
SINGLE PLAY button (15, 19)
• Press to set the unit to stop automatically after each
track.
• Press during repeat playback to select one of the
following repeat modes:
– Single repeat (repeats the current track).
– Disc repeat (repeats all tracks on the disc).
(continued)
