33
GB
Editing a Recor
ded MD
6
Press DISPLAY repeatedly to select a character type:
To select
Press DISPLAY repeatedly until
Uppercase letters
“A” appears in the display
Lowercase letters
“a” appears in the display
Numbers
“0” appears in the display
7
Turn AMS or the scrub dial to select the character.
The selected character blinks.
Characters appear in the following order:
Letters
/
numbers
/
symbols
You can use the following symbols:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `
You can press DISPLAY to change the character type
(step 6) at any time.
8
Press AMS or ENTER/YES to enter the selected
character.
The character selected in step 7 lights steadily, and the
cursor shifts to the right, blinks, and waits for the
input of the next character.
9
Repeat Steps 7 and 8 to enter the complete title.
If you entered the wrong character
Press
0
or
)
until the character to be corrected
starts blinking, then repeat Steps 7 and 8 to enter the
correct character.
To erase a character
Press
0
or
)
until the character to be erased starts
blinking, then press EDIT/NO. Pressing EDIT/NO
repeatedly allows you to erase several characters in
order.
To enter a space
Press AMS while the cursor is blinking.
10
Press ENTER/YES.
This completes the disc or track naming procedure.
The disc or track name appears in the display.
To cancel without labeling
Press STOP.
Notes
You cannot enter track names during backtrack recording.
Copying a disc or track name (Name Copy)
You can copy a disc or track name and use it to name
another track within the same disc or the disc itself.
1
During stop, play, or pause mode, press EDIT/NO to
display the Edit Menu.
2
Turn AMS to display “Name ?”, then press AMS.
3
Turn AMS to display “Nm Copy ?”, then press AMS.
4
Turn AMS to specify whether you wish to copy the
disc or track name.
• To copy the disc name, turn AMS to display “Disc”
• To copy the track name, turn AMS so that the track
number with the name you want to copy blinks in
the display.
5
Press AMS.
If “No Name” is displayed, no name has been entered
for the disc or selected track number.
6
Turn AMS to specify where you want to copy the
name to.
• To copy the name as the disc name, turn AMS to
display “Disc”
• To copy the name as a track name, turn AMS so that
the track number you want to copy the name to
blinks in the display.
7
Press AMS.
“Complete!!” appears for a few seconds and the disc
or track name is copied.
If “Overwrite?” appears in the display
The disc or track you selected in step 6 already has a
name. To continue and replace the previous name with
the one selected in step 4, press AMS.
To cancel without copying the name
Press EDIT/NO or STOP.
BANK 1
REHEARSAL
TRACK
20
40
-dB
L
R
TR
M
S
F
