6
GB
Names and
Functions of
Parts
This chapter explains the names of the
parts and their basic functions, as well
as some basic operations. The
numbers in parenthesis refer to pages
in this manual with detailed
explanations.
1
U
(Power) switch (11, 23)
Press to turn the power of this unit on or off.
2
UNDO button (35)
Cancels the previous edit operation and restores the
MD data to its former state.
3
AUTO MODE buttons (14)
Use to set the unit to pause automatically before
playing a track.
AUTO CUE
Sets unit to skip over the blank space at the beginning
of each track and pause just before the sound begins.
AUTO PAUSE
Sets unit to pause at the beginning of each track.
AUTO OFF
Cancels the auto modes.
4
Pads / pad indicators (11, 13)
• When the pad indicators are green:
Press to start playback from the beginning of the
respective track. To switch between different groups
of tracks, press BANK.
• When the pad indicators are red:
Press to start playback from the previously assigned
cue point. To assign cue points, see “Assigning Cue
Points to Pads” on page 13.
5
0
button (12)
Hold down for fast reverse.
6
r
REC button (23, 24, 25)
• Press during stop to enter the record standby mode.
• Press during playback or pause to enter backtrack
recording standby mode.
• Press during recording to manually mark a track
number.
7
REC PAUSE button / indicator (24, 25)
• Press during record pause or backtrack recording
standby mode to start recording.
• Press during (normal) recording to pause.
The indicator blinks during the record pause or
backtrack recording standby mode.
8
STOP button (12, 24)
Press to stop playback or recording.
9
CUE button / indicator (12)
Press to return to and pause at the last cue point (the
last point where playback was started).
Lights when paused at cue point.
Controls
