Sony KDL-60R550A, Operating Instructions Manual

Page: 90 / 120

32
GB
Using BRAVIA Sync with
BRAVIA Sync Control
The BRAVIA Sync Control function enables the TV to communicate with the connected equipment that is
compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by
connecting Sony equipment that is compatible with BRAVIA Sync Control (with HDMI/MHL cables), you
can control them together.
Be sure to connect the equipment correctly, and make the necessary settings.
BRAVIA Sync Control
• Automatically turns the connected equipment off when you switch the TV to standby mode using the
remote.
• Automatically turns the TV on and switches the input to the connected equipment when the equipment
starts to play (except in MHL mode).
• If you turn on a connected audio system while the TV is on, the sound output switches from the TV
speaker to the audio system.
• Adjusts the volume ( 2 +/– ) or mutes the sound ( % ) of a connected audio system.
• You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote.
Possible operations with BRAVIA Sync buttons, see page 13.
– Refer to the instruction manual of the equipment for available control.
• If “BRAVIA Sync Control” of the TV is set to “On”
,
“BRAVIA Sync Control” of the connected equipment
is also automatically switched to “On”.
x To make the BRAVIA Sync Control settings
The BRAVIA Sync Control settings must be set on both the TV side and connected equipment side. See
“BRAVIA Sync Settings” (page 50) for the TV side settings. For settings on the connected equipment,
refer to its operating instructions.