Sony KDL-60R550A, Operating Instructions Manual

Page: 92 / 120

34
GB
Type 1: Secured network
with Wi-Fi Protected
Setup™ (WPS)
The WPS standard makes security of a wireless
network as straightforward as pressing the WPS
button on the wireless LAN router. Before setting
up a wireless LAN, check the location of the WPS
button on the router and verify how to use it.
For security purpose, “WPS (PIN)” provides a
PIN code for your router. PIN code is renewed
every time you select “WPS (PIN)”.
1
Press HOME , then select “Settings” > “Set-
up” > “Network” > “Network Set-up” > “Set
up network connection”.
2
IP Address setting/Proxy server:
– automatic setting:
“Set up network connection” > “Auto”
– manual setting:
“Set up network connection” > “Custom” >
“Wireless Set-up”
3
Select “WPS (Push Button)” for Push Button
method or “WPS (PIN)” for PIN method.
4
Follow the instructions on the set-up screen.
Type 2: Secured network
without Wi-Fi Protected
Setup™ (WPS)
To set up a wireless LAN, SSID (wireless network
name) and security key (WEP or WPA key) will be
required. If you do not know them, consult the
instruction manual of your router.
1
Press HOME , then select “Settings” > “Set-
up” > “Network” > “Network Set-up”.
2
IP Address setting/Proxy server:
– automatic setting:
“Set up network connection” > “Auto”
– manual setting:
“Set up network connection” > “Custom” >
“Wireless Set-up”
3
Select “Scan”, then select a network from the
list of scanned wireless networks.
4
Follow the instructions on the set-up screen.
• Button name of the WPS may differ depending
on the router (e.g. AOSS button).
• To use the network with IPv6, select
“Settings” > “Set-up” > “Network” > “IPv6/IPv4
Priority” > “IPv6”, then select “Auto” in “Set up
network connection”.
• When IPv6 is selected, “Set up network
connection” must be set to “Auto”. HTTP Proxy
cannot be set.
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and
any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect.
Or, you can deactivate the security settings of
the wireless LAN router, and then connect the
equipment to a TV in a non-secure status.
• To use the network with IPv6, select
“Settings” > “Set-up” > “Network” > “IPv6/IPv4
Priority” > “IPv6”, then select “Auto” in “Set up
network connection”.
• When IPv6 is selected, “Set up network
connection” must be set to “Auto”. HTTP Proxy
cannot be set.