Sony KDL-60R550A, Operating Instructions Manual

Page: 100 / 120

42
GB
Equaliser Adjusts sound frequency settings.
Press
G / g to select the desired sound frequency, then press F / f to adjust the
setting and press . The adjusted settings will be received when you select
“Sound Mode” options.
Selecting “Reset” will set the “Equaliser” to original settings.
• Adjusting higher frequency will affect higher pitched sound and adjusting lower
frequency will affect lower pitched sound.
Sound Booster Produces a fuller sound for more impact, by emphasising the bass/treble
sounds.
Clear Voice Makes voice sound clearer.
Simulated Stereo Adds a surround-like effect to mono programmes.
Intelligent Volume Minimizes the difference in volume level between all programmes and adverts
(e.g. adverts tend to be louder than programmes).
Balance Emphasises left or right speaker balance.
Volume Offset Adjusts the volume level of the current input relative to other inputs.
Dual Sound Sets the sound from the speaker for a stereo or bilingual broadcast.
“Stereo”/“Mono”: For stereo broadcasts.
“Main”/“Sub”/“Mono”: For bilingual broadcasts, select “Main” for sound
channel 1, “Sub” for sound channel 2, or “Mono” for mono channel, if available.
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select “Mono”.
The sound becomes monaural, but the noise is reduced.
• The “Dual Sound” setting is memorized for each programme position.
• You cannot listen to stereo broadcast sound when “Mono” is selected.
z
• If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”,
“Main” or “Sub”. However, when the external equipment connected to the HDMI
jack (except HDMI 1) is selected, this is fixed to “Stereo”.
• If you access to FM Radio mode, set “Dual Sound” to “Stereo” or “Mono”.
Speakers “TV Speakers”: Turns on and outputs the TV’s sound from the TV speakers.
“Audio System”: Turns off the TV speakers and outputs the TV’s sound from
external audio equipment connected to the audio output jacks on the TV.
You can also turn on the connected equipment that is compatible with BRAVIA
Sync Control, after making the appropriate settings of BRAVIA Sync Control.
Audio Out “Variable”: When using an external audio system, volume output from audio
out can be controlled using the TV’s remote.
“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume
control to adjust the volume (and other audio settings) through your audio
system.
Advanced Settings “Dynamic Range”
Compensates for differences in the audio level between different channels
(only for Dolby Digital audio).
z
• The effect may not function or may vary depending on the programme regardless
of the “Dynamic Range” setting.
“Digital Audio Out”
Sets the audio signal that is output from the HDMI IN 1 (ARC) of the TV. Set to
“Auto”, when connecting equipment compatible with Dolby Digital or DTS. Set
to “PCM”, when connecting equipment not compatible with Dolby Digital.
“Downmix Mode”
Set the downmix method of multi-channel to two-channel sound. Select
“Surround” to get best surround performance.
Select “Stereo” to get a stereo output.