A
d
mini
s
tra
ting
t
he
SNT
-V7
04
Setting the Alarm Out — Alarm out setting Page
52
Setting the Alarm Out
— Alarm out setting Page
Use this page to set up for the Alarm out function that
controls the alarm out 1 or alarm out 2 of the I/O port
located on the rear of this unit. You can control the
alarm out when a trigger occurs by an external sensor
input, a manual trigger button, the Day/Night function or
the timer.
Setting the Alarm Out Function
— Alarm out setting Page
Alarm out
Select the alarm out for which you want to set the Alarm
out function from among 1 to 4.
Mode
Select the mode of the Alarm out function.
Disable:
Select
Disable
if you do not want to USB the
Alarm out function.
Manual:
Controls the Alarm out manually.
In this mode, you can short-circuit and open the
Alarm out by clicking the
(Trigger) button on
the main viewer page. (See “Controlling the
Application Manually” on page 24.)
Day/Night
(EVI-D70, SSC-DC590/DC690 only)
:
Controls Alarm out by synchronizing with the Day/
Night function of the camera. When you select
Day/
Night
, the
Day/Night setting
button appears. Click
the button, and the Camera setting page appears and
you can set the Day/Night function (see page 32).
In the Night mode, the relay corresponding to the
Alarm out is short-circuited. In the Day mode, it is
open.
Alarm:
Controls Alarm out by synchronizing with an
external sensor inputs or the built-in activity
detection function. When you select
Alarm
, the
Alarm mode setting section appears (see page 52).
Timer:
Controls Alarm out by the timer. When you
select
Timer
, the Timer mode setting section appears
(see page 53).
OK/Cancel
See “Buttons common to every setting page” on page
27.
Alarm mode setting Section
Alarm
Select the alarm to link the alarm out 1 function. If the
selected alarm is detected, the alarm out 1 status
changes.
Sensor 1 – 4:
External sensors connected to sensor
inputs 1 to 4 of this unit I/O port
Activity detection CH1-4:
The activity detection
function built in this unit.
To set the activity detection function, click
Activity
detection
. The Activity detection setting page
appears (see page 60).
Schedule
Click
Schedule check
to display the Alarm out 1(to 4)
Schedule setting page.
For setting the schedule, see “Setting the Schedule —
Schedule setting Page” on page 59.
Alarm duration
Select the duration for which the alarm output is short-
circuited between
1
and
60
sec.
OK/Cancel
