A
d
mini
s
tra
ting
t
he
SNT
-V7
04
Setting the Camera Position and Action — Preset position setting Page (BRC-300, EVI-D100, EVI-D70 only)
43
Checking the Preset Position
Settings
— Preset position table Section
The table shows the preset position name and preset
position at alarm for each preset number.
Programming the Tour
— Tour setting Section
When you select
Tour
in Preset Channel Selection
section, Tour Schedule setting section is displayed.
Once you set a tour, the preset positions stored in each
camera are programmed in sequence and they are
activated repeatedly.
You can set up to 5 patterns of tour, and 64 preset
positions can be programmed to a tour.
Note
To program a tour, you must store the positions and
actions of each camera (preset positions).
Tour name
Select a tour name from among
A
,
B
,
C
,
D
and
E
.
Stay time
Type a period of time for which the camera is to stay at
each preset position, between
1
and
3600
seconds.
Pan speed
Select the pan speed from the drop-down list. You can
select the pan speed from
1
to
19
and
Fastest
. The
camera pans faster with a higher number setting. With
Fastest
, the camera pans at the maximum speed.
Tilt speed
Select the tilt speed from the drop-down list. You can
select the tilt speed from
1
to
15
and
Fastest
. The
camera tilts faster with a higher number setting. With
Fastest
, the camera tilts at the maximum speed.
CH1 to 4
Select the preset position you want to program to the
tour.
Sequence
Select the preset position (channel number and preset
number) for each of 64 list boxes. The camera moves to
the preset positions stored in the selected preset numbers
in sequence. The sequence of camera movement starts
from the preset position specified in the upper-left list
box to the right, then to the lower list boxes from left to
right. After the preset position specified in the last list
box, the camera returns to the first preset position. This
sequence is cyclical.
To determine the end of the program, select
end
in a list
box. When the camera reaches the preset position
specified in the list box before the end, it returns to the
first preset position, and the sequence recycles.
Apply
Click this button when programming a tour.
You can program a tour as follows.
1
Select Tour name to set Stay time, Pan speed and
Tilt speed of the tour.
2
Select the preset position you want to program from
the list box next to the channel (
CH1
,
CH2
,
CH3
or
CH4
) to which you want to set the tour.
3
Click
Sequence set
.
The preset position selected in step 3 is displayed
by the channel number and the preset number
(example: 1-1) in the selected Sequence box.
If you click
Preset call
before clicking
Sequence
set
, the camera moves to the selected preset
position. You can check the image from the preset
position selected in the main viewer page.
