A
d
mini
s
tra
ting
t
he
SNT
-V7
04
Sending an Image via E-mail — SMTP setting Page
51
Alarm mode setting Section
Alarm
Select the alarm to link the SMTP function. If the
selected alarm is detected, a still image is captured and
sent via an E-mail.
Sensor 1 – 4
External sensors connected to sensor inputs 1 to 4 of this
unit I/O port
Activity detection CH1-4
The activity detection function built in this unit.
To set the activity detection function, click
Activity
detection
. The Activity detection setting page appears
(see page 61).
Note
The image that can be attached to an E-mail is the one
captured at the moment when an alarm is input. If the
next alarm occurs while the captured image is being
processed, that alarm is ignored.
Schedule
Click
Schedule check
to display the SMTP Schedule
setting page.
For setting the schedule, see “Setting the Schedule —
Schedule setting Page” on page 59.
OK/Cancel
See “Buttons common to every setting page” on page
27.
Periodical sending mode setting
Section
Channel Selection
Select the channel from which images are periodically
sent by e-mail.
The channel number is the same as the connector
number
t
1 to 4 to which the camera is connected on
this unit.
Interval time
Type the interval at which you want to send an E-mail
with a still image periodically. You can set the hour (H)
and minutes (M) between 30 minutes and 24 hours (one
day).
Note
When
Video mode
is set to
MPEG4
, 1 GOP (Group of
Pictures) of MPEG4 image will be attached to an e-mail.
Schedule
Click
Schedule check
to display the SMTP Schedule
setting page.
For setting the schedule, see “Setting the Schedule —
Schedule setting Page” on page 59.
OK/Cancel
