PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
4-5 (E)
Diag help
help show this help menu.
version Hardware and Software Version
dump [addr] (b/w/d) dump memory.(byte/word/double word)
set [addr],[data](;) set memory.(no verify)
mode (mode) change access mode.(byte/word/dword)
i2c[via1/via2/voa] ssaa [dd] i2c R/W ss:slave adrs aa:adrs dd:data(8bit).
i2cvfp port ssaa [dd] i2c R/W port(5bit) .
reset (cpu/ec/ti/fpga/all) system reset.
goto (appli/loader/diag/roop) Restart mode select (Auto restart)
auto [times] auto diagnostic mode
ti Ti DSP,SDRAM diagnostic mode
shram SH SDRAM & SRAM Marching Check
peri Peripherals(SystemPort,SIO1/2,USB) Check
vl video out color level check( vl+[return]key to help )
irout [on/off] SONY TV power code on:ON/ off:OFF
irsel [1/2/r] remocon in camera select( irsel+[return]key to help )
led led+[return]key to help
sum sum+[return]key to help
audioin [0/1/2] Audio In sel 0:Mic / 1:LINE MIC / 2:DSB
auxmute/linemute/ringmute [0/1] Audio Mute 0:mute 1:active
extmic Extmic Presence 0:no 1:exist
ectest EC,EC-Mic selftest
singen [freq] [Amp] Sin Wave generator (f<16000,a<7fff)
videoin [0/1][0/1/2/3] Video In sel CH 0:Cam / 1:Aux1 / 2:Aux2 / 3:IR
videomain [0/1] Main Video Out 0:VOA/1:CyberPro
videosub [0/1] Sub Video Out 0:VOA/1:CyberPro
videodsb [0/1] Dsb Video Out 0:ENC1,1:ENC2
videoirv [0/1] IR Video Sel 0:Cam1,1:Cam2
videoswap [0/1] Aux Video Swap 1:Swap
videosync Video Sync Check
videomode [ntsc/pal] Set Video Mode
videovfp [ch][0..a] Set video VFPGA matrix
videoafp [ch][0..3] Set video AFPGA matrix
cb cb+[return]key to help( Internal Colorbar Data Output )
