PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
1-2 (E)
PS-686 board
SW-1259 board
LED-433 board
MS-73 board
CN-2635 board
CN-2636 board
LED-430 board
CPU-382 board
DSP-113 board
1-3. Board Location
1-2. Power Supply
In this system, the power is supplied to each device by the
AC adaptor connected to the PCS-PG70/PG70P.
Therefore, before repairing or replacing the parts, turn off
the power of the PCS-PG70/PG70P and disconnect the
power cord from the AC adaptor.
At the repair service, it is recommended to use the AC
adaptor or AC power cord that are supplied with the unit.
w
.
Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
.
Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
Never use an injured power cord.
For customers in the North America (USA and
Canada)
Power cord, 125 V, 7 A (2.0 m):
!
1-757-562-61
For customers in European countries except the
United Kingdom
Power cord, 250 V, 2.5 A (0.75 m):
!
1-575-131-61
For customers in China
Power cord, 250 V, 2.5 A (0.75 m):
!
1-782-476-22
