Sony IC RECORDER ICD-SX750 User Manual Download

Page: 110 / 136

ICD-SX750 4-157-612-13(1)

110

Troubleshooting

Before taking the IC recorder for repair, check the following sections. Should any

problem persist after you have made these checks, consult your nearest Sony dealer.

IC recorder

Symptom

Remedy

The IC recorder cannot be

turned off.

Slide the HOLD switch in the direction of the arrow when the

IC recorder is stopped (page 25).



The IC recorder cannot be

turned on.

The HOLD switch is set. Slide the HOLD switch in the direction

opposite that of the arrow (page 25).



Display does not

disappear.

Display appears blurred.

Remove the protective film on the display window before you

use the IC recorder.



The IC recorder does not

operate.

The batteries have been inserted with incorrect polarity

(page 14).
The batteries are weak (page 16).
The buttons are locked with the HOLD switch (page 78). (If you

press any button, “HOLD” will flash for 3 seconds.)



No sound comes from the

speaker.

The volume is turned down completely (page 54).
Headphones are plugged in (page 55).



Sound comes from the

speaker even when the

headphones are plugged

in.

If you plug in the headphones not securely during playback,

the sound may come from the speaker. Unplug the

headphones and then insert them securely.



Summary of Contents for IC RECORDER ICD-SX750









































































































































Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands

Sony IC RECORDER ICD-SX750, User Manual

Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands