Sony IC RECORDER ICD-SX750 Page 116 User Manual Download

Page: 116 / 136

ICD-SX750 4-157-612-13(1)

Symptom

Remedy

The file transferred from

your computer cannot be

played back.

The file format may differ from those that can be played back

using the IC recorder (.mp3/.wma /.msv/.wav) (page 101).

Check the file name.



A file name is not

displayed.

If an LPEC, MP3, or WMA file has no title, a file name is

displayed instead. If you want to display a title, enter it using

computer.
The title/artist name of an LPCM file cannot be displayed as

title/artist name is not supported. In this case a file name is

displayed.



Playback sound becomes

loud unexpectedly.

“V-UP” is set to “MAXIMUM” or “MEDIUM.” Set it to “OFF”

(page 85).



Please note that recorded messages may be erased during service or repair work.

Summary of Contents for IC RECORDER ICD-SX750









































































































































Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands

Sony IC RECORDER ICD-SX750, User Manual

Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands