Sony IC RECORDER ICD-SX750 User Manual Download

Page: 90 / 136

ICD-SX750 4-157-612-13(1)

Menu items

Settings (*: Initial setting)

See page

FORMAT

Sets the formatting of the drive after “ERASE ALL DATA?” has

been displayed.

YES:

The drive will be formatted.

NO*:

The drive will not be formatted.

Notes

Use the IC recorder formatting function to format the memory.

If you format the IC recorder using your computer, the sound

may be interrupted unexpectedly and the recording time may

be shortened.
When you format the memory, all the data which you have

stored in the IC recorder will be deleted. Once the data is

deleted, you cannot retrieve it.





–

BEEP

Sets whether a beep will be heard or not.

ON*:

A beep will sound to indicate that an operation has been

accepted.

OFF:

No beep sound will be heard.

Note

The alarm sounds even if you set “BEEP” to “OFF” in the menu.



–

Summary of Contents for IC RECORDER ICD-SX750









































































































































Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands

Sony IC RECORDER ICD-SX750, User Manual

Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands