4GB Micro-Speak Plus User Guide Text
Important Notes
Please read all instructions carefully before using this product and retain this document for future reference.
Micro-Speak is not recommended for children under 3 years.
Do not allow your Micro-Speak to come into contact with water.
Micro-Speak contains a non-replaceable, rechargeable battery. Please do not attempt to open the case and
remove the battery. Warranty is void if the case is opened for any reason.
To avoid damaging your ears with excessive noise, please adjust the volume level before you listen to a track
using earphones.
Features
The following two paragraphs will assist users with a visual impairment to locate buttons and features.
The speaker and microphone are hidden behind the grill on the top half of the unit. The Record Button is located
below the speaker grill in a central position. There is an LCD display below the Record Button and three
navigation buttons are located below the LCD display. These navigation buttons consist of a square Play/Pause
button in the centre with the Previous Button located to the left and the Next Button to the right.
There are volume control buttons and an earphone socket located on the right side. The Power ON/OFF switch is
located on the bottom edge to the left side. Slide the switch to the left positon to turn ON and slide to the right to
turn OFF. A USB Socket is located to the right of the Power Switch.
Audible prompts and beep sound confirmations will assist you with certain functions during use.
Special Note
The backlight for the LCD screen has been turned off for this model. This will not matter for the majority of users,
but it has been done due to the restrictions of the software and primarily to assist users with low vision. Please
note the backlight on the LCD screen is only enabled for the standard version of the Micro-Speak but that model
does not include audible prompts.
Welcome message
When using Micro-Speak for the first time slide the Power Switch to the ON position and the MICRO-SPEAK
name will appear on the screen for 3 to 4 seconds. Micro-Speak will then go into Play Mode and the pre-recorded
welcome message will be ready to play. Press the Play/Pause button once to hear the message and alter the
volume to suit your requirements.
NOTE: After the Micro-Speak is powered ON, you will hear an audio prompt that will state the unit is ready to use
followed by the status of the Battery. There are four battery levels, comprising of High, Medium, Low and Empty.
Battery charging instructions are detailed below.
