Sony HXR-MC2500 Operating Manual Download

Page: 90 / 112

(Warning indicator

pertaining to the write-protect of the
memory card)

• The write-protect switch is set to lock

position on the memory card.

• Access to the memory card was

restricted on another device.

(Warning indicator pertaining to

internal memory)

Slow flashing

• Free spaces for recording images are

running out.

Fast flashing

• There are not enough free spaces for

recording images. Delete unnecessary
images (p. 58), or format the internal
memory (p. 59) after storing the images
on other media (p. 79).

• The image database file may be

damaged (p. 60).

(Warning indicator pertaining to

the free space for recording in the
internal memory and memory card)

Pre-end caution (slow flashing)

When [SIMUL/RELAY REC] is set to
[RELAY REC] and in either of the
following cases.

• When recording in the memory card,

and total free space of the internal
memory and memory card for
recording is less than 5 minutes.

• When recording in the internal

memory, the memory card is full and
free space of the internal memory is
less than 5 minutes.

Media full caution (fast flashing)

• When the internal memory and

memory card are full.

(Warning indicator pertaining to

memory card formatting)

• The memory card is damaged.
• The memory card is not formatted

correctly (p. 59).

(Warning indicator pertaining to

the external media device)

• The image database file may be

damaged (p. 60).

• The external media device is damaged.

(Warning indicator pertaining to

formatting of the external media
device)

• The external media device is damaged.
• Disconnect the external media device

once, and format it on a computer. Note
that if you format the external media
device, all the recorded movies and still
images are deleted.

• If the same warning message is

displayed after formatting the external
media device, the device may be
incompatible with your camcorder, or
damaged. Replace it with a new one.

* When [BEEP] is set to [ON] (p. 77), you hear a

melody when the warning indicators appear on
the LCD screen.

Warning indicators and messages (Continued)

Summary of Contents for HXR-MC2500

















































































































Search results

Summary of Contents for HXR-MC2500

Reviews:

Related manuals for HXR-MC2500

Brands by name

Popular brands

Sony HXR-MC2500, Operating Manual

Search results

Summary of Contents for HXR-MC2500

Reviews:

Related manuals for HXR-MC2500

Brands by name

Popular brands