14
Step 2: Attaching the supplied microphone and
the lens hood with lens cover
1
Attach the wind screen
1
to the
microphone
2
.
2
Loosen the screw of the
microphone holder
3
and open
the cover.
3
Place the microphone into the
holder with the model name
facing upward, close the cover,
and tighten the screw.
4
Connect the plug of the
microphone to the INPUT1 jack
5
.
5
Put the microphone cable into the
cable holder
4
.
6
Select the channel with the REC
CH SELECT switch
6
.
The REC CH SELECT switch positions
and the channels to be used at the switch
positions are shown in the table below.
z
Tips
• See page 42 for adjusting the volume.
• Set the +48V switch to ON when you use the
supplied microphone.
Attaching the supplied
microphone
1
2
3
5
4
6
REC CH SELECT
switch position
Input jack
Channel to
be used
CH1, CH2
INPUT1
Channel1
Channel2
INPUT2
-
CH1
INPUT1
Channel1
INPUT2
Channel2