6-26
HVR-V1J/V1U/V1N/V1E/V1P/V1C
21. C5 Page table
Note 1:
If reading/writing data on pages C5, set data: 0C to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
18. C2 Page table
Note 1:
If reading/writing data on pages C2, set data: 0C to page:
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
22. C6 Page table
Note 1:
If reading/writing data on pages C6, set data: 0C to page:
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to DF
Fixed data-1 (Initialized data)
19. C3 Page table
Note 1:
If reading/writing data on pages C3, set data: 0C to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
20. C4 Page table
Note 1:
If reading/writing data on pages C4, set data: 0C to page:
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
23. CC Page table
Note 1:
If reading/writing data on pages CC, set data: 0C to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)