Sony HVR-V1C, Service Manual, Page: 202 / 475

6-44
HVR-V1J/V1U/V1N/V1E/V1P/V1C
Order Page Address Data Procedure
11 0 10 00
12 6 CA 07
13 6 15 92
14 6 01 0B Press PAUSE (Write) button.
15 6 02
Check the data changes to
“01”.
16 6 01 00 Press PAUSE (Write) button.
17 6 C9 10
18 0 10 0C
19
D
0E 0F Press PAUSE (Write) button.
(CD)
20 0 10 00
21 6 14 87
22 6 9D 10
23 0 03 29
24 0 10 0A
25 1E
Set the bit value of bit6 is “1”,
F
and press PAUSE (Write)
(AF)
button. (Note 3)
26 0 10 06
27 F0 to F7
From Table 6-1-2, set the type
E
A data, and press PAUSE
(6E)
(Write) button.
28 0 10 00
29 6 01 0F Press PAUSE (Write) button.
30 6 02
Check the data changes to
“01”.
31 1
Read the displayed data
(Note 4) and write it down.
32
For the type B to type G,
perform order 26 - 31, same
as type A.
33
Select the type of which data
read in the order 31 is nearest
to 0. (Note 5, 6)
34 0 10 06
35
E
F0 to F7
Set the data of the type
(6E)
selected in the order 33 and
press PAUSE button.
36 0 10 00
12. Linearity Adjustment
Correct the linearity of AFE (analog Front End).
Subject Clear chart
(Color reproduction adjustment
frame)
Adjustment Page 6E
Adjustment Address F0 to F7
Note 1: If reading/writing data on pages 6E, set data: 06 to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages 6E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Check that the data of page: 6, address: 02 is “00”.
If not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.
Switch setting
1) POWER ......................................................... CAMERA mode
2) ND FILTER ............................................................................ 2
3) REC FORMAT (Menu setting) ............................. HDV1080i
4) STEADY SHOT (Menu setting) ..................................... OFF
5) D. EXTENDER (Menu setting) ...................................... OFF
Note 3: For the bit values, refer to “6-4. SERVICE MODE”, “4-
3. 3. Bit value discrimination”.
Note 4:
The upper two digits of the page: 1 displayed data of the
adjusting remote commander (RM-95).
1 : XX : XX
Displayed data
Read the “Data Section” of adjustment remote com-
mander (New LANC jig).
P : 01 a: XX d: XX
Data Section
Note 5:
Data is displayed in the signed chart form. (Data: FF
becomes –1.)
Note 6: If there are multiple types of which data is nearest to 0,
select the type in the center.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 0 10 0A
3 E
8C 01 Press PAUSE (Write) button.
(AE)
4 0 10 06
5
F
90 Note down the data.
(6F)
6
F
91 Note down the data.
(6F)
7
F
92 Note down the data.
(6F)
8
F
93 Note down the data.
(6F)
9
D
5E Note down the data.
(6D)
10
D
5E 5C Press PAUSE (Write) button.
(6D)
Address
F0 F1 F2 F3 F4 F5 F6 F7
Type
A 00 00 00 00 00 00 00 00
B E1 E1 EE F2 F6 FA FC FD
C C2 C2 DC E4 EB F3 F7 F9
D A3 A3 C9 D6 E1 EC F2 F5
E 83 83 B7 C8 D6 E5 ED F2
F 80 80 A5 BA CB DE E8 EE
G 80 80 92 AC C1 D7 E4 EA
Table 6-1-2