Sony HVR-V1C, Service Manual, Page: 227 / 475

6-69
HVR-V1J/V1U/V1N/V1E/V1P/V1C
43. Color Reproduction Check (Outdoor HD: ND 1)
RadarW RadarW RadarW RadarW RadarW
Subject Color bar chart (Color reproduction
adjustment frame)
Filter ND filter 1.0, 0.4 and 0.1
Measurement Point Video terminal of Adjusting remote
A/V jack commander
(75
Ω
terminated)
Measuring Instrument Vectorscope
Specified Value All color Data of page: 6,
luminance address: 0C is
points should “00”
settle within each
color
reproduction
frame.
Note 1:
Perform “Color Reproduction Adjustment” before this
adjustment.
Note 2: Check that the data of page: 6, address: 02 is “00”. If
not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.
Switch setting
1) POWER ......................................................... CAMERA mode
2) ND FILTER ............................................................................ 1
3) D. EXTENDER (Menu setting) ...................................... OFF
4) STEADY SHOT (Menu setting) ..................................... OFF
5) REC FORMAT (Menu setting) ............................. HDV1080i
Checking method:
Order Page Address Data Procedure
1
Place the C14 filter on the
lens.
2 0 01 01
3 0 10 0A
4
E
8C 01 Press PAUSE (Write) button.
(AE)
5 0 10 00
6 6 C9 10
7 6 CA 04
8 6 D0 48
9 6 01 3D Press PAUSE (Write) button.
10 6 02
Check the data changes to
“01”.
11 6 0C Check the data is “00”.
12
Adjust the GAIN and
PHASE of the vectorscope,
and set to the burst lumi-
nance point to the burst
position of color reproduc-
tion frame.
13
Check that the each color
luminance point is in each
color reproduction frame.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE (Write) button.
2 6 CA 00
3 6 C9 00
4 0 10 0A
5
E
8C 00 Press PAUSE (Write) button.
(AE)
6 0 10 00
7 0 01 00
8
Remove the C14 filter on the
lens.