HELP
HVR-DR60
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
1. Attach the sheet (FP-431) to the FP-431 flexible cable of PWB by referring to the figure below.
2. Attach the sheet (heatsink A) to the heatsink A by referring to the figure below.
3. Attach the harness sheet to the battery terminal board and DC-IN connector by referring to the figure below.
Cut the harness sheet into 40 x 40 mm square to use.
Attach the sheet starting from the
portion shown by the arrows.
Tolerance: 0 to 2 mm
Wind the sheet around the FP-431
mount.
FP-431 Mount.
Reference
Sheet (FP-431)
Attach the slit portion of the
sheet to the bent portion.
Sheet (Heatsink A)
Heatsink A
Attach the sheet
(Heatsink A) to
standard portion.
Fold back
Battery Terminal Board
1 to 3 mm
1 to 3 mm
Harness Sheet
Harness Sheet
DC-IN Connector
