HVR-DR60
6-3
6-3. Installation of Driver
Install the driver exclusive for adjustment/confirmation of HVR-
DR60.
Install the driver in the following procedures. Once this work is
performed, further installation is not required later on.
Note:
If the PC restarts after the driver installation completes,
starts from the procedure No. 15.
1. Double-click “Port95nt.exe” in the Uploader folder.
2. According to the installation wizard, begin the installation.
3. After the installation completes, restart the PC.
4. After restarted, open “Control Panel”
→
“Add Hardware”, and
click “Next”.
Fig. 6-3-1
5. Select “Yes, I have already connected the hardware” and click
“Next”.
Fig. 6-3-2
6. Select “Add a new hardware device” and click “Next”.
Fig. 6-3-3
7. Select “Install the hardware that I manually selected from a
list” and click “Next”.
Fig. 6-3-4
8. Select “Show All Devices” and click “Next”.
Fig. 6-3-5
