Sony HDCAM HDW250 Maintenance Manual Download Page 50

Page: 50 / 84

3-12

HDW-250

3-2. DIAG Menu

3-2. DIAG Menu

The unit has the DIAG menu that is used for adjustments and diagnostics.
This menu has the hierarchical structure. The PAGE sub-menu is characterized as it is surrounded by the

triangle bracket < >.

Operation procedure

Starting up the DIAG menu

Press the DIAG button to enter the DIAG menu.

Select a PAGE
Move the asterisk

(cursor) using the UP or DOWN button to select the desired PAGE.

When the desired PAGE is selected, press the SET button.
Repeat this procedure until the desired ITEM is found.

Selecting an ITEM

Move the asterisk

(cursor) using the UP or DOWN button to select the desired item.

When an item is selected, press the SET button.

The setup value blinks.

Setting the ITEM

Change the data of the selected setup item by pressing the UP or DOWN button.

Press the SET button to register and save the changed value.
To return to the original value before change, press the DISPLAY button.

Exiting the DIAG menu

Press the DIAG button to exit the DIAG menu.

Summary of Contents for HDCAM HDW250





















































































Search results

Summary of Contents for HDCAM HDW250

Reviews:

Related manuals for HDCAM HDW250

Brands by name

Popular brands

Sony HDCAM HDW250, Maintenance Manual

Search results

Summary of Contents for HDCAM HDW250

Reviews:

Related manuals for HDCAM HDW250

Brands by name

Popular brands