Sony HDCAM HDW250, Maintenance Manual

Page: 49 / 84

3-11
HDW-250
3-1. Setup Menu
Display on LCD Setup item Sub item Setup value Description
LOAD/SAVE Reads out and saves the setup data of the bank.
LOAD LOAD 0 Reads the setup data of the bank by selecting a number among
1 0 to 3 and by pressing the SET button.
2 0 : Default data when shipped from the factory
3 1 : Bank 1 data
2 : Bank 2 data
3 : Bank 3 data
SAVE SAVE 1 Saves the setup data of the bank by selecting a number among
2 1 to 3 and by pressing the SET button.
3 1 : Bank 1 data
2 : Bank 2 data
3 : Bank 3 data
REMOTE Performs setting regarding remote control.
REMOTE REMOTE 9PIN Sets which interface the REMOTE connector is used for.
ISR 9-PIN : The REMOTE connector is used as the Sony 9-pin
protocol interface.
ISR : The REMOTE connector is used as the ISR interface.
BAUD BAUD 19200 : 19200 bps Sets the communication speed (baud rate) in the ISR mode.
RATE 9600 : 9600 bps 19200 : 19200 bps
4800 : 4800 bps 9600 : 9600 bps
2400 : 2400 bps 4800 : 4800 bps
1200 : 1200 bps 2400 : 2400 bps
1200 : 1200 bps
CAM REMOT CAMERA DIGI Selects a protocol that is used for communication with the
REMOTE 700 camera which is connected to the CAMERA connector.
AUTO DIGI : Communication is performed by the digital command.
700 : Communication is performed by the SONY Camera
System-700 Control Protocol
AUTO : Communication is performed by the usable protocol that
is detected automatically when a camera is connected.
SYSTEM Performs setting regarding system.
FREQUENCY FREQUENCY 59.94 Selects a field frequency of the unit.
60 59.94 : Sets 59.94 Hz as the field frequency of the unit.
60 :
Sets 60 Hz as the field frequency of the unit.
HD LINE HD LINE 1035 Selects the number of effective recording lines of a frame of the
1080 analog HD input.
1035 : Sets 1035 lines as the effective recording lines of a frame.
1080 : Sets 1080 lines as the effective recording lines of a frame.
The items that are surrounded by square (
[|]
) in the Setup value column, show the default setting when shipped from the factory.
TRACKING
Display on LCD Setup item Setup value Description
AUTO TRCK AUTO TRACKING OFF Sets whether or not to perform auto tracking.
ONE OFF : Disables auto tracking.
ON ONE : Auto tracking is performed only once when tape is inserted.
ON : Enables the auto tracking all the time.
The items that are surrounded by square (
[|]
) in the Setup value column, show the default setting when shipped from the factory.