Sony FD Mavica MVC-FD97, Service Manual

Page: 98 / 144

5-30
16. Strobe White Balance Adjustment
Adjust the white balance when the strobe light flashed.
Mode CAMERA
Subject Flash adjustment box (Note 3)
(1.0 m from the front of lens)
Adjustment Page F
Adjustment Address 4D, 4E, 64, 69, 6A, 6B
Note 1: Perform “Hall Adjustment”, “Flange Back Adjustment”,
“Light Level Adjustment” and “Auto White Balance Ad-
justment” before this adjustment.
Note 2: Perform this adjustment in the flash adjustment box.
Note 3: Refer to “4. Preparing the Flash Adjustment Box”.
(See page 5-7)
Note 4:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of the unit OFF/ON.
Note 5: “Strobe White Balance Adjustment” is available only
once after the power is turned on. Turn the power off,
then on again if the adjustment is retried.
Switch setting:
1)
FLASH ...................... ON
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
4
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
5 6 90 00
6 6 91 00
7 6 92 00
8 6 93 C0
9 6 6C 01
10 6 2C 01
11 6 01 79 Press PAUSE button.
12 6 01 67 Press PAUSE button.
13 6 02 Check the data changes to “01”.
14 6 01 00 Press PAUSE button.
15 6 01 79 Press PAUSE button.
16 6 01 67 Press PAUSE button.
17 6 02 Check the data changes to “01”.
18 6 01 00 Press PAUSE button.
19 6 01 79 Press PAUSE button.
20 6 01 B9 Press PAUSE button. (Note 6)
21 6 02 Check the data changes to “01”.
22
Perform “Strobe Light Level
and White Balance Check”
Note 6:
The adjustment data will be automatically input to
page: F, address: 4D, 4E, 64, 69, 6A and 6B.