1-18
MVC-FD100/FD100H/FD200/FD200H
B
Va
ri
o
u
s
p
la
y
b
a
c
k
71
Enlarging a part of the
still image (Zoom and
trimming)
To return to the normal size
Zoom out with the zoom lever until the
zoom scaling indicator (
×1.1)
disappears from the screen, or simply
press the center
z
.
To record an enlarged image
(trimming)
1
Enlarge the image.
2
Press the shutter button. The image
is recorded at 640×480 size and the
image on the LCD screen returns to
the normal size after recording.
Notes
•
You cannot trim moving images, still
images recorded in Clip Motion, TEXT
mode, or uncompressed images.
•
Zoom scaling is up to 5× regardless of the
original image size.
•
The quality of enlarged images may be
deteriorated.
•
The original data is left even if you enlarge
the image.
•
The enlarged image is recorded as the
newest file.
1
Set the PLAY/STILL/MOVIE
selector to PLAY.
2
Display the image to be
enlarged.
3
Zoom in/out the image with
the zoom lever.
The zoom scaling indicator
appears on the LCD screen.
4
Press the control button
repeatedly to select the
desired portion of the image.
v
: The image moves downward
V
: The image moves upward
b
: The image moves rightward
B
: The image moves leftward
1
4
3
72
Playing back the still
images in order
(SLIDE SHOW)
This function plays back the recorded
still images one after another.
This function is useful for checking the
recorded images or for presentations,
etc.
To cancel the slide show
Select [CANCEL] in step
2
or
3
.
To skip to the next/previous
image during the slide show
Select
\b
/
B\
at the lower-left on the
LCD screen.
Note
The interval setting time may vary
depending on the image size.
1
Set the PLAY/STILL/MOVIE
selector to PLAY.
2
Select [FILE] and then [SLIDE
SHOW] from the menu.
Set the following items.
INTERVAL
You can select from 1 min (one
minute), 30 sec (30 seconds),
10 sec (10 seconds), 5 sec
(5 seconds), or 3 sec (3 seconds).
REPEAT
ON:
Plays back images
continuously in a loop until
[RETURN] is selected (the slide
show stops automatically after
approximately 20 minutes* when
the image is played back from a
floppy disk).
OFF:
After all images have been
played back, the slide show ends.
∗
The slide show does not end until all
the images are played back, even if it
takes more than 20 minutes.
3
Select [START].
The slide show begins.
1
2, 3
B
Va
ri
o
u
s
p
la
y
b
a
c
k
73
Viewing images on a
TV screen
You can play back the recorded images
by connecting your camera to the TV.
Before connecting your camera, be
sure to turn off the TV, connect the
VIDEO connecting cable, and turn on
the TV.
Note
•
You cannot use a TV that has an antenna
(aerial) connector only.
•
When viewing a still image on the TV, the
black band may appear around the image.
1
Connect the VIDEO
connecting cable to the
VIDEO OUT jack of your
camera and to the VIDEO
INPUT jack of the TV.
2
Turn on the TV and start
playback on your camera.
The playback image appears on the
TV screen.
Set the TV/VIDEO
switch to
“VIDEO”.
VIDEO
connecting
cable
(supplied)
To VIDEO OUT jack
To VIDEO
INPUT jack
74
B
Editing
Preventing accidental
erasure (PROTECT)
This function is used to prevent any
valuable images that you have
recorded from being erased
accidentally.
The
-
(protect) indicator appears on
protected images.
Note:
If you format a floppy disk or a “Memory
Stick”, all images are erased even when they
are protected.
To release protection
Select [OFF] in step
2
.
To release protection
If you selected [ALL] in step
2
, select
[OFF]. If you selected [SELECT] in
step
2
, select the images to be
unprotected with the control button,
then select [ENTER].
In single mode
1
Set the PLAY/STILL/MOVIE
selector to PLAY, then
display the image to be
protected.
2
Select [FILE], [PROTECT],
and then [ON] from the menu.
The displayed image is protected
and the
-
indicator appears.
In INDEX mode
1
Set the PLAY/STILL/MOVIE
selector to PLAY, then
display the INDEX screen.
1
2, 3
2
Select [FILE], [PROTECT],
and then [ALL] or [SELECT]
from the menu.
3
When you select [ALL]
Select [ON].
All the images in the floppy disk or
the “Memory Stick” are protected.
When you select [SELECT]
Select all the images to be
protected with the control button,
then select [ENTER]. The selected
images are protected.
ENTER
PROTECT
CANCEL
0 0 0 1 - 0 0 0 6 / 0 0 4 0
SELECT
OK
