Sony DVP NS725P - Progressive-Scan DVD/CD Player, Service Manual

Page: 12 / 133

1-4
17
Hookups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected Connection Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 41),
TVS WIDE (page 41)
(page 18)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 41)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 41).
(page 19)
AV amplifier (receiver) having a Dolby *
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 62)
(page 20)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS
** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 62)
– DTS (5.1ch) (page 62)
(page 21)
A D
A
B
C
D
, continued
18
Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page
15).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
A
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT LINE OUT S VIDEO
OUT
R-AUDIO-L VIDEO PR Y
COMPONENT VIDEO OUT
PB
A
LINE OUT
R-AUDIO-L VIDEO
TV
l : Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
to audio input
(yellow) *
(white)
(yellow) *
to LINE OUT L/R
(AUDIO)
(red)
19
Hookups
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B
B-1
B-2
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT S VIDEO
OUT
PR Y
COMPONENT VIDEO OUT
PB
LINE OUT
VIDEO R-AUDIO-L
B-1
B-2
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT LINE OUT
R-AUDIO-L VIDEO
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Coaxial digital
cord (not supplied)
Stereo audio cord
(not supplied)
to audio input
to coaxial digital input
l
: Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL)
, continued
20
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use .
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT S VIDEO
OUT
PR Y
COMPONENT VIDEO OUT
PB
LINE OUT
VIDEO R-AUDIO-L
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
LINE OUT
R-AUDIO-L
VIDEO
C-2
C-1
CD/DVD player
or
Front (R)
Front (L) Rear (R)
Subwoofer
l : Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Center
Rear (mono)
Stereo
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(red) (white)
to coaxial digital input
[Speakers]
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL)