81
Additional Information
Additional
Information
Troubleshooting
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
remedy the problem. Should any problem persist, consult
your nearest Sony dealer.
Power
The power is not turned on.
,
Check that the mains lead is connected securely.
Picture
There is no picture.
,
Check that the player is connected securely.
,
The video connecting cord is damaged. Replace it
with a new one.
,
Make sure you connect the player to the video
input connector on the TV. (page 8)
,
Make sure you turn on the TV.
,
Make sure you select the video input on the TV so
that you can view the pictures from the player.
,
In the setup display, set “LINE” and
“COMPONENT OUT” in “CUSTOM SETUP” to
the appropriate item conforms to your system.
(page 70)
,
“OFF” in “COMPONENT OUT” under “CUSTOM
SETUP” is selected, when you have connected the
player to a monitor or projector via only the
COMPONENT VIDEO OUT connectors. To view
the picture, connect the monitor via LINE-1,
VIDEO OUTPUT or S VIDEO OUTPUT.
Picture noise appears.
,
Clean the disc.
,
If the video signal from your DVD player has to go
through your VCR to get to your TV, the copy-
protection applied to some DVD programs could
affect picture quality. If you still experience
problems after checking your connections, please
try connecting your DVD player directly to your
TV’s S-input, if your TV is equipped with this
input. (page 9)
Even though you set the aspect ratio in “TV
TYPE” in “SCREEN SETUP” of the setup display,
the picture does not fill the screen.
,
The aspect ratio is fixed on your DVD.