70
Settings and Adjustments
“CUSTOM SETUP” allows you to set the playback
conditions.
The default settings are underlined.
Select “CUSTOM SETUP” in the setup display.
x
COMPONENT OUT
Selects the methods of outputting video signals from the
COMPONENT VIDEO OUT (Y, C
B
, C
R
) connectors on the
rear panel of the player.
In order to set COMPONENT OUT to ON, you must first
connect the player to a projector or monitor using the
LINE-1 connector so that the setup display appears on
your screen.
• OFF: outputs no signals.
• ON: outputs the component video signals.
Notes
• When you set “LINE” to “RGB”, you cannot set
“COMPONENT OUT” to “ON.”
• When you connect the player to a monitor or projector via only
the COMPONENT VIDEO OUT connectors, do not select
“OFF.” If you select “OFF” in this case, the picture may not
appear.
x
LINE
Selects the methods of outputting video signals from the
LINE-1(RGB)–TV connector on the rear panel of the
player.
• VIDEO: outputs the video signals.
• S VIDEO: outputs the S video signals.
• RGB: outputs the RGB signals.
Notes
• If your TV does not conform to the S video or the RGB signals,
no picture appears on the TV screen even if you select “S
VIDEO” or “RGB.” Refer to the instructions supplied with
your TV.
• If your TV has only one SCART (EURO AV) connector, do not
select “S VIDEO.”
Custom Settings (CUSTOM SETUP)
CUSTOM SETUP
LINE:
AUTO PLAY:
DIMMER:
PAUSE MODE:
To set, press , then .
To quit, press .
VIDEO
COMPONENT OUT:
OFF
OFF
BRIGHT
AUTO
TRACK SELECTION:
OFF
ON
ENTER
PARENTAL CONTROL
DISPLAY
PLAYBACK MEMORY:
BOOKMARK RESET
x
AUTO PLAY
Selects the Auto Play setting when you connect the AC
power cord to the AC outlet (mains).
• OFF: does not use “TIMER,” “DEMO1” or “DEMO2” to
start playback.
• TIMER: starts playing when the player is turned on, or
at any time you want when connected to a timer (not
supplied). Set the timer when the player is in standby
mode (the power indicator lights up in red).
• DEMO1: starts playing the first demonstration
automatically.
• DEMO2: starts playing the second demonstration
automatically.
x
DIMMER
Adjusts the lighting of the front panel display.
• BRIGHT: makes the front panel display bright.
• DARK: makes the front panel display dark.
• OFF: turns off the lighting of the front panel display.
z
You also can adjust the lighting with the DIMMER button on the
player.
x
PAUSE MODE (DVD only)
Selects the picture in pause mode.
• AUTO: A picture, including subjects that move
dynamically, is output with no jitter. Normally select
this position.
• FRAME: A picture including subjects that do not move
dynamically is output with high resolution.
x
BOOKMARK RESET
,
Select “BOOKMARK RESET
,
.” The BOOKMARK
RESET display appears. And then press ENTER to reset
all bookmarks.
x
PARENTAL CONTROL
,
Sets a password and playback limitation level for DVDs
with playback limitation for children.
The same password is used for both Parental Control and
Custom Parental Control (page 53) .
For details, see “Limiting Playback by Children (Parental
Control) .”
