22
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the instructions supplied with your disc.
1
Turn on your TV.
Turn on the TV and select the video input so that you
can view the pictures from this player.
When using a receiver (amplifier)
Turn on the receiver (amplifier) and select the
appropriate position so that you can listen to the
sound from this player.
2
Press
!
to place the player in standby mode.
The player enters standby mode and the power
indicator lights up in red.
3
Press
@
/
1
on the remote to turn on the player
.
The power indicator lights up in green.
4
Press
H
.
The player starts playback. Adjust the volume on the
TV or the receiver (amplifier).
To change the disc
Press DISC CHANGE to turn the indicator on. Then turn
the
.
–/
>
+ dial until the desired disc number
appears on the front panel display.
Press the
.
–/
>
+ dial to start playback.
Playing Discs
Playing Discs
This chapter describes how to play a
DVD/CD/VIDEO CD.
!
H
Power indicator
@
/
1
DISC CHANGE
1
2
3
4
5
6
7
8
9
0
A
-/--
B
C
D
ALL
DVD
EDIT
MEGA
SORT
FILE
LOAD
CD
TIME
.
–/
>
+ dial
When you play a disc recorded in the NTSC
color system, the player outputs the video
signal or the setup display etc. in the NTSC
color system and the picture may not appear
on PAL color system televisions. In this case,
open the disc tray and remove the disc.
