Overview
11
DTP-T2000A 4-121-350-
11(1)
q;
System initialize button
While holding down this button, pressing the
on/standby button (
1
) returns the
communication processor software to the factory
default initial state.
qa
Network initialize button
While holding down this button, pressing the
on/standby button (
1
) restores the factory
default values for the IP address settings.
qs
DVD-ROM drive
This drive accepts DVD-ROM discs. Use the
open/close button (
9
) to insert and remove
discs.
qd
Controller port
Connects with the commander interface
connector of the attached controller.
qf
GPO indicator
These are eight indicators that are user-definable
by PSP
TM
software developers.
qg
Headset connector
The PSP-1000 series headphones with remote
control or a commercially sold headset (with a
stereo mini-plug) can be connected here.
qh
GPI switch
These are eight dip switches that are user-
definable by PSP
TM
software developers.
Unit rear
EXT
RF (EXT)
FOOT SW
DC IN
19.5V
L
AUDIO OUT
R
1
Aerial
For wireless LAN use.
2
Extension connector
For use by service personnel only.
3
Dedicated connector for servicing
For use by service personnel only.
Caution
Usage of this port may cause irreparable damage to the
system.
4
Foot switch connector
Connects to the supplied foot switch.
5
Network connector
Connector for a network cable. Allows
connection to a local area network.
6
VGA connector
Connects to a device with a VGA IN connector.
7
AUDIO OUT connector
Connects to a device with an AUDIO IN
connector.
8
Vent fan
Vent for internal fan used to cool unit. Be sure
not to obstruct this vent, as doing so may cause a
fire. Also, to prevent any hindrance to air flow,
position the unit an adequate distance from walls.
1
2
3
4
5
6
8
9
q;
7
qa
Part names and usage
Part names and usage
