65
When using the device internationally, it is your
responsibility to ensure that it is used in compliance
with the following specifications:
AC voltage
Wireless products regulations
Other safety regulations or requirements
Be sure not to short-circuit the terminals of the
device with metallic objects.
Never leave the device exposed to high
temperature, such as in a car parked in the sun or
under direct sunlight.
Connect the AC adapter to an easily accessible AC
outlet. Should you notice an abnormality in the AC
adapter, disconnect it from the AC outlet.
Avoiding water and moisture
Note that condensation may form temporarily in
cases such as when the player is moved quickly
from a low-temperature environment to a high
temperature environment or used in a room that
has a heater just turned on. Condensation creates a
phenomenon where moisture in the air adheres to
surfaces such as metal panels, etc., and then
changes to liquid. If condensation forms in the
device, leave it turned off until the condensation
disappears. If you use the device with condensation
present, a malfunction may result.
The Digital Paper device is not waterproof.
Remember to follow the precautions below.
Be careful not to drop the device into a sink or
other container filled with water.
Do not use the device in humid locations or bad
weather, such as in the rain or snow.
Do not get the device wet.
If you touch the device with wet hands, or put it in a
damp article of clothing, the device may get wet and
this may cause a malfunction.
Charging the Digital Paper device
Heat may build up in the device while charging, or if
it is used for an extended period of time.
Use the supplied USB cable or the AC adapter only.
Do not use any other USB cable or AC adapter.
Never wrap the device in anything when it is being
charged. Heat build-up in the device may cause
malfunction or damage.
If the battery quickly runs out of power after being
fully charged, it may be reaching the end of its life
and should be replaced. Consult the Sony Support
Center.
Cleaning the Digital Paper device
Clean the device with a soft cloth, such as a
cleaning cloth for eyeglasses. Make sure that there
is no dust or dirt on the soft cloth, as the device may
be damaged.
Do not use any type of abrasive pad, scouring
powder or solvent, such as alcohol or benzene, as it
may mar the finish of the case.
Wipe the stylus with a dry cloth when it gets dirty.
Tapping or dragging on the touchscreen using a
dirty stylus may damage the surface.
Be sure to keep the device away from water or spills.
Regulatory information
This device displays the information below.
The Declaration of Conformity (DoC) logo and the
FCC Identifier (FCC ID) based on the FCC Rules
The VCCI mark based on RULES FOR VOLUNTARY
CONTROL MEASURES
The marks and registration numbers of the radio
wave and radio communication acts
You can display these marks or registration numbers.
Tap [Settings] in the [Home] screen, then tap [About]
[Regulatory Information].
If you cannot display the marks or registration
numbers due to a malfunction, contact the Sony
Support Center.
End User License Agreement
You can display the End User License Agreement
from the [Settings].
Tap [Settings] in the [Home] screen, then tap
[About]
[End User License Agreement].
Display
The display is made of plastic film to be thin and
lightweight. When the Digital Paper device is
illuminated, distortion of the plastic film may occur.
This is not malfunction.
Do not apply excessive pressure to the touchscreen.
The color or brightness may become uneven, and
may cause malfunction to the device.