Sony DCR-TRV120P, Service Manual, Page: 104 / 195

5-4
Note 2: Connect the adjustment remote commander to the LANC
jack, and set to HOLD switch to the “ADJ” side.
Note 3:
720H model: DCR-TRV120/TRV120P
960H model: DCR-TRV120E/TRV125E/TR8000E/
TR8100E
J-1 J-2
J-6
J-3
J-7 J-8
J-4 J-5
Fig. 5-1-1
J-9 J-10
J-11 J-12 J-13
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
J-13
J-14
Name
Filter for color temperature correction (C14)
ND filter 1.0
ND filter 0.4
ND filter 0.1
Pattern box PTB-450
Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
(Note 1)
Siemens star chart
Clear chart for pattern box
Multi CPC jig
CPC-13 jig
Power cord (Note 2)
Extension cable (16P, 0.5 mm)
IR receiver jig
Mini pattern box
Camera table
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-806-A
J-6080-807-A
J-6020-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-311-A
J-6082-443-A
J-6082-223-A
J-6082-357-A
J-6082-383-A
J-6082-353-B
J-6082-384-A
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
White balance check
For checking the flange back
For adjusting the LCD block
For adjusting the video section
For connecting the battery terminal and DC power supply
For extension between the CD-242 board (CN101) and
the VC-235 board (CN1501)(720H model)
For extension between the CD-244/269 board (CN151) and
the VC-235 board (CN1501)(960H model)
For adjusting the IR transmitter
For adjusting the flange back
For adjusting the flange back
5-1. CAMERA SECTION ADJUSTMENT
1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope • Color monitor • Vectorscope
• Regulated power supply • Digital voltmeter • Frequency counter
Note 1: If the micro processor IC in the adjustment remote
commander is not the new micro processor (UPD7503G-
C56-12), the pages cannot be switched. In this case, replace
with the new micro processor (8-759-148-35).
J-14