Sony CM-SB200 Operating Instructions Manual Download

Page: 5 / 76

Getting Started

!¢

!∞

!§

CLR

PWR

END

SEND

!º

!¡

!™

!£

Looking at Your Phone

For more information, refer to the page numbers in parentheses ( ).

Antenna (18)

Red/Green LED (XX)

Alerts for incoming calls/messages
and identifies charging status.

Earpiece

Jog Dial™ navigator (14)

Turn (scroll) and press (select) to
access menus and settings.

Display (14)

Ringer speaker

SEND

key (21 to 23)

Press to make or receive calls.

key (78)

Press to access messages.

CLR

key (19, 21, 40)

Press to clear characters on the display
or exit the current operation.

!º

Number and

keys

(21, 25, 49)

Use the keypad to enter numbers
and letters. Use

and

move the cursor.

!¡

Microphone

!™

PWR

key (18)

Press to turn the phone on or off.

!£

END

key (19, 21, 23)

Press to end calls or cancel
operations and return to standby
mode.

!¢

Battery release tab (15)

Slide up to remove the battery.

!∞

Battery (15)

!§

Connector (16)

Connects the phone to the travel
adapter or other accessory.

SB200 04-11 prep

4/9/99, 2:21 PM

Summary of Contents for CM-SB200













































































Search results

Summary of Contents for CM-SB200

Reviews:

Related manuals for CM-SB200

Brands by name

Popular brands

Sony CM-SB200, Operating Instructions Manual

Search results

Summary of Contents for CM-SB200

Reviews:

Related manuals for CM-SB200

Brands by name

Popular brands