3-19
CCU-590/P/V1(E)
CONTOROL SELECT
switches
EN
CCU DIAG
CHU LOCK
CONTOROL
SELECT
CANCEL
ENTER
+
-
AT
REFERENCE
IN
LOCK
REFERENCE
PHASE
REMOTE
H
SC
+
-
Memory Stick slot
3.
Set the CONTROL SELECT switch on the EN-156B
board as follows, and hold the upper and lower
switches with fingers to maintain the setting.
Upper switch:
ENTER
Lower switch:
+
(upper side)
4.
Turn on the power.
5.
When the POWER LED (MAIN) of the unit starts
blinking, release the upper and lower switches of the
CONTROL SELECT switch.
6.
Lighting of the POWER LED (MAIN) indicates
completion of the program upgrade.
7.
Turn off the power, and then remove the Memory
Stick.
3-11. Updating the Software
Upgrading ROM Program Using Memory Stick
The following describes the program upgrade procedure of
the ROM on the AT-155B board using a Memory Stick.
Equipment
.
Memory Stick (commercially available)
Preparation
Copy the software for Memory Stick to the Memory Stick
folder below.
Folder and file name of upgraded ROM data:
\MSSONY\PRO\CAMERA\CCU590\SDCCU.ROM
Procedure
1.
Turn off the power.
2.
Insert a Memory Stick into the Memory Stick slot on
the AT board.
