36
GB
Digital Manual
Tuning
Tunes the digital channels manually. This feature is available
when “Digital Auto Tuning” is set to “Antenna”.
1
Press the number button to select the channel number
you want to manually tune, then press
F
/
f
to tune the
channel.
2
When the available channels are found, press
F
/
f
to
select the channel you want to store, then press
.
3
Press
F
/
f
to select the programme number where you
want to store the new channel, then press
.
Repeat the above procedure to manually tune other channels.
Subtitle Set-up
Subtitle Setting
When “For Hard Of Hearing” is selected, some visual aids
may also be displayed with the subtitles (if TV channels
broadcast such information).
Subtitle
Language
Allows you to select the language of the subtitles.
Audio Set-up
Audio Type
Switches to broadcast for the hearing impaired when “For
Hard Of Hearing” is selected.
Audio Language
Selects the language used for a programme. Some digital
channels may broadcast several audio languages for a
programme.
Audio
Description
Provides audio description (narration) of visual information if
TV channels broadcast such information.
Mixing Level
*
Adjusts the unit main audio and Audio Description output
levels.
Dynamic Range
Compensates for differences in the audio level between
different channels. Note that this function may have no effect
for some channels.
Optical Out
Selects the audio signal that is output from the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the media
receiver. Set to “Auto” when equipment compatible with
Dolby Digital is connected, and set to “PCM” when non-
compatible equipment is connected.
z
* This option is only available when “Audio Description” is set to “On”.
Radio Display
Displays the screen wallpaper when you listen to a radio broadcast after 20 seconds
without pressing any buttons.
You can select the screen wallpaper colour, display a random colour or view a
slide show (page 27).
To cancel the screen wallpaper display temporarily, press any button.
Parental Lock
Sets a parental guidance level. Programmes that exceed the set level can only be
watched after entering the correct PIN code.
1
Press the number buttons to enter your existing PIN Code.
If you have not previously set a PIN, a PIN Code entry screen appears. Follow
the instructions of “PIN Code” below.
2
Press
F
/
f
to select the level you want to set (refer to the table below), then
press .
3
Press
RETURN
.
(Australian model)
Level
Function
Block All
All programmes need a password to view.
G and above
To lock “General” and above programmes.
PG and above
To lock “Parental Guidance” and above programmes.
M and above
To lock “Mature” and above programmes.
