6
GB
4: Connecting the AC power
cord
~
• Make sure to secure the AC power cord.
• To ensure compliance with current EMC
legislation, ensure the following conditions are
met.
• Fix the AC power cord holder (supplied) after
checking the AC power cord is in the groove of
the AC power cord holder (supplied) to avoid
scratching the AC power cord.
5: Performing the initial set-
up
Inserting batteries into the remote
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
Establishing the wireless
communication between the unit
~
• This unit should be placed in the same room.
• Keep about 30 cm to 20 m distance between the
monitor and media receiver when installing.
• Keep clear the area between the monitor and
media receiver. Otherwise the picture may
deteriorate.
• Rearrange the installation position of the monitor
and media receiver in case of fuzzy picture.
• Do not place either unit on a metallic rack.
• Do not use two units or more at the same time in
an area of radio interference.
1
Press
1
to turn on the unit power.
DC
IN
18V
AC
IN
1
2
3
Media receiver
to AC power
outlet
Monitor
to AC power outlet
Screws (supplied)
AC power cord
holder (supplied)
Ferrite core
Push and lift the cover to open.
POWER button
Media receiver
