SonoSite MicroMaxx Service Manual Download Page 24

Page: 24 / 98

Chapter 3:

System Overview

Imaging Modes

2D (256 gray shades)

Color power Doppler (CPD) (256 colors)

Color Doppler (Color) (256 colors)

M Mode

Pulsed wave (PW) Doppler

Continuous Wave (CW) Doppler

Tissue Harmonic Imaging

Image Storage

The number of images saved to the CompactFlash card vary depending on the card storage capacity.

Cine buffer

Accessories

Hardware, Software, and Documentation

AIUM Ultrasound Medical Safety Guidance Document

Battery

Biopsy Guide

Carry case

External display

Guidance on the interpretation of TI and MI to be used to inform the operator, Annex HH, BS EN 60601-2-37

Mobile Docking System Lite (MDS Lite)

Mobile Docking System (MDS)

Mini-Dock

Power supply

Quick Reference Guide

SiteLink Image Manager 3.0

SonoCalc IMT

System User Guide

Triple Transducer Connect

Ultrasound gel

Cables

See the

MicroMaxx Ultrasound System User Guide

MDS User Guide

, and the

MDS Lite User Guide

for information on

cables.

Summary of Contents for MicroMaxx



































































































Search results

Summary of Contents for MicroMaxx

Reviews:

Related manuals for MicroMaxx

Brands by name

Popular brands

SonoSite MicroMaxx, Service Manual

Search results

Summary of Contents for MicroMaxx

Reviews:

Related manuals for MicroMaxx

Brands by name

Popular brands