Sonosax Stelladat II, User Manual

Page: 53 / 93

53
INTERFACE IN/OUT
ANALOG AUDIO
Inputs Mode: Transformerless Active Balanced
Impedance:
6 k
Ω
Connector: XLR3-32
SRL Level: + 6 dBu
Max. Level: + 18 dBu
Outputs Mode: Transformerless Active Balanced
Impedance: Max. 50
Ω
Connector: XLR3-31
SRL Level: + 4 dBu / + 6 dBu
Max. Level: + 26 dBu
Phones 6 mm Stereo Phone Jack
(Load Impedance Min. 50
Ω
)
DIGITAL AUDIO
Inputs Format: AES/EBU
Connectors: XLR3-31 (110
Ω
) & Optical
Outputs Format: AES/EBU
Connectors: XLR3-32 (110
Ω
) & Optical
WORD / EXT SYNC SIGNAL
Input Format: Standard Selection of Square Wave Rising or
Falling Edge (TTL Compatible)
Impedance: 75
Ω
Connector: BNC
Output Format: Standard Selection of Square Wave Rising or
Falling Edge (TTL Compatible)
Impedance: 75
Ω
Connector: BNC
VIDEO SYNC SIGNAL
Input Format: NTSC/PAL/SECAM
Level: 0.3 - 4.0 V p-p
Impedance: 75
Ω
Connector: BNC
SERIAL I/O, PARALLEL I/O
RS-422 Format: Serial
Connector: D-SUB 9p. (female)
Sonosax Acc. Format: Specific
Connector: # 002211 (Arting or compatible)
GENERAL SPECIFICATIONS
Dimensions (W x H x D): 280 mm x 80 mm x 216 mm
Weight: 3.6 kg (Battery excluded)
Power Requirements: AC 100-240 V, 50/60 Hz (External Power Supply)
DC 11 - 18 V (DC Direct Feed)
Battery NP-1B 12 V NiCd /NPX 13.2 V NiCd / NP-L46 14.4 V Li-Ion
Power Consumption: ~ 15 W (depending on configuration)
Operating Conditions: n.a.
Storage Conditions: Refer to as above