24
PAUSE
key. In
PLAY
mode, stops the playback. The LED glows up and the PLAY
LED keeps glowing. To resume playback:
PLAY
key.
In
REC
mode, stops recording. The LED lights up and the REC LED keeps
glowing. To resume recording:
REC
key.
PLAY
key: playback. The LED glows up. To stop playback:
PAUSE
or
STOP
key.
Works also as optional record unlock key.
In
PLAY
or
REC
mode, tape positions marker key (
Locator
).
Rewind
(REW) key. The LED glows up. To stop rewinding:
STOP
key.
Two or more rapid keystrokes put the recorder in Index back search mode. e.g. 4
strokes = 4 ID back. The LED glows up. When all leds are off: the searched ID is
reached. Stelladat II's behavior depends then from the selected
Mode after loc
option from the Configuration menu.
In
PLAY
mode: Audible search mode back at x5 speed.
Recording
(REC) key. Depending of its programming (Configuration Menu >
Record key mode), single or associated with the
PLAY
key: starts recording. The
LED glows. To stop recording:
PAUSE
or
STOP
key.
In
REC
mode, a keypress records a new START ID.
In
Power OFF mode
: holding down the key turns the recorder on.
STOP
key.
Leaves the other modes. The LED glows. The tape is engaged in the tape scanner.
A subsequent keypress disengages the tape off the tape scanner. The LED turns
off.
In
Power ON
and
STOP
mode: holding the key during 3 sec. turns the recorder off.
MON
key.
In
REC
mode: A press on this key switches the monitoring to
TAPE
mode: the
recorded tape is monitored.
is displayed. A subsequent press on the key
resumes
DIRECT
monitoring mode: the sound before recording is monitored,
is displayed.
In
STOP
mode: 1 second press accesses
Go to last rec
function. As far as the
tape has not been ejected since, Stelladat II locates the tape at the end of the last
recording.
Pressed simultaneously with the
DISP
key: Display of PCM errors.
PRG
key (a.k.a.
User key
).
In
STOP
or
PLAY
mode, a press on the key enters the
BLANK SEARCH
mode:
The device detects the blank unrecorded section of the tape. In PLAY mode, the
recorder stops the tape at the end of the recorded part. A subsequent press exits
the
BLANK SEARCH
mode.
In
REC
mode this key is assignable (Configuration Menu > Function keys def >
PRG key). The user has three choices:
MIC MUTE
,
TONE MUTE
or
Disabled
.
DISP
key.
In
REC
,
PLAY
or
STOP
mode, repeated strokes on this key display the Status
screens: a set of useful informations about the recorder's confi-guration consultable
even while recording.
If the four-tracks module is installed: holding this key for two sec. switches
meter
display mode
: the four meters are drawn broader for better readability.
Pressed simultaneously with the
MON
key: Display of PCM errors.
Summary of Contents for Stelladat II
