Procedure to perform a Pic reset (power manager micro-controller)
Please follow those steps
:
1.
Remove the bottom cover (6 screws)
2.
Remove the 4-tracks board, which is held on the main board by two connectors
3.
Short-circuit on the main board the two Pic reset contacts (two soldering points)
4.
Put the 4-tracks board back
in its place
5.
Screw the bottom cover
Main
board
4-tracks board to
be removed
PIC
Small SMD
capacitor
These two
soldering points
must be short-
circuited.
Pin 2
Summary of Contents for Stelladat II
