22
6 Webserver
Home Page
The Home Page shows the status of the line, the line hold button and the various
dialling options. Use this screen to change the 7 Speed Dial call numbers.
The Home page is loaded on the first connection to the unit, chosen from the
Home Menu dropdown and after uploading new firmware from the Update screen.
Figure 6-3: Home Page – for basic call control and setting preset calls.
Whilst calls are in progress you can also use this page to
send DTMF audio data to the caller.
The Home Page can be protected by setting a password for
Level 1 Access. If this is set and the appropriate password
has not been submitted, then the default becomes the
Device Info page.
Status
Shows the status of the telephone line.
Line
Control to take control of the line in response to incoming
ringing or to drop currently connected call.
The DTMF Send String is defined here and verified by
pressing the return key. Then, when the line is connected
it can sent by the button or by the remote input. A serial
command DTS:abcd will also send the DTMF string “abcd”
directly.
Dial
Controls to make outgoing calls to previously connected
numbers, to a selection of 7 Speed Dials or to a directly
entered number - type number in the box plus the return
key to validate it. Note a ‘w’ character in the dialstring will
cause the dialling process to wait for 1 second and then
continue with the remaining characters in the string.
To update the Speed Dials enter the number, and name if
required, then press the update button to save the new
information
The number entries should be preceded with the
appropriate country codes to support international calling
