KT-560M
– USER MANUAL
74
16.7
Connection to WiFi network
The camera allows to connect to existing Wi-Fi networks. The connection procedure is
described in the chapter 11.3.
17 HDMI connection
It is possible to transmit camera images live from the camera to audio/video devices with
HDMI ports (monitors, TVs, projectors). To do so, turn on the camera and connect it to the
HDMI signal receiving device, with HDMI cable connected to miniHDMI port [26] on the
camera. As a signal port, select the HDMI port that has been used to connect with the
camera on the signal receiving device.
18 Firmware update
NOTE!
Do not switch off the camera's power supply, remove the batteries or SD card
while the firmware upgrade is in progress.
Before commencing the upgrade procedure make sure the battery is fully charged.
To update the firmware upload the latest version of it into the following folder on SD card:
(driver letter):\GCamera\update\. Insert the card into the camera. Turn on the camera and
go to setup Menu
and ‘Info’ tab. Click SD Card Update. The firmware upgrade window
menu will open:
