KT-560M
– USER MANUAL
66
Thermogram files are stored in the following directories:
- on SD card in: SD card\SD\DCIM\
- on internal storage in: Internal storage\ DCIM\
Selected, or all, files must be copied to PC's hard disk drive before they can be opened in
Sonel ThermoAnalyze2. Procedures for opening and editing images are described in the
software manual.
16.4
Reading data from the SD card using the external card reader
The content stored on the SD card can be read using SD card reader. To do so remove
the SD card from the camera (as described in chapter 13) and then insert it into the SD
card reader. After being automatically installed in your system, the card will be recognized
as another drive on your PC (the name of the drive will be the same as the SD card's
name). The thermogram files are located in the following directory: (the drive let-
ter):\DCIM\...
Copy selected, or all, files to your PC using Windows Explorer and then these files can be
open in Sonel ThermoAnalyze2 software. The procedure of how to open and edit images
is described in the user manual of the software.
16.5
LAN connection
The camera can either be connected to PC directly or via existing LAN network. Turn on
the camera and follow LAN connection instructions in chapter 11.3 to get the camera con-
nected to PC through the LAN cable. The next step is to connect the camera (LAN[29]
connector) to PC using LAN cable. This connection requires configuration of the PC's
network adapter. While in Windows go to
START
, then select
Control Panel
and then
click
Network and Internet.
