10.4 Working with connections
10.4.1 Establish a connection with the Communication assistant
1. Install the Commander support software as described in
.
2. Connect the device to your PC according to
3. Start the Commander software on your PC.
4. Click on
Communication assistant
on the right-hand side of the Commander window and follow
the instructions. During this procedure the communication assistant will search for connected
devices. Upon successful completion, the new connection is added to the connections list (tab
Connections (F8)
).
5. In the
Communication
Section at the right-hand side of the Commander window select Mode
Connection
and the previously created connection from the drop-down list.
6. Click
Connect
to establish a connection with the USH-9. If the connection was successful a green
icon is displayed at the top-right corner of the Commander window.
To view the settings of the connected device or to read the current measurements, follow the steps
described in
and
.
1
0
S
u
p
p
o
rt
so
ft
w
ar
e
C
o
m
m
an
d
er
34
Manual
